The smartest Cable Jet Machine which is being used hugely in the telecom industry is known as Fiber Optic Cable cable jet. Itmay seem like quite a common cable, but it has some unique features which make Fiber optic Cables different from any other cable used as conductor of the data signal. The cable has the capability to transfer data, maximum at the unit of petabit which also mathematically described as 1015 bit/Sec. The cable has the very critical formation consist of fine fiber which can carry optical lights and protect the cable from UV ray. So dealing with Fiber optic installation is not a general operation. It needs specialized engineer and operators, as well as machines. Cable jet machines.
Now coming into the machine needed to establish a connection or install fiber optics blowing machine between two place blowing machines are used mainly to pull and push the fiber optic wire under the surface through the ducted channel. The machine is no doubt an expensive one and need special operator to operate it in the field. To run a cable jet machine a constant power and backup power is very essential with several tools like twister, charger, cutter, rope, cable jet etc.
As the installation process needs expert’s care the process is also quite complex. The manufacturers of fiber optic cable clearly state the indication and safety measures which the operators have to follow while pulling it under the surface. This special cable has many outstanding features which is also not much expensive compared to the performance in long distance connection.
Whether it’s a huge building or two separate places Fiber Optic Cable is capable of providing high speed data connectivity and other telecommunication service Cable Jet Machine machine. The core element of this cable which is fiber is coated very safely and individually under a high resistance plastic capsulation. As the fibers carry light to carry the flow of data it needs special treatment and encapsulation from the external impact like UV ray. The main character of this cable is, the less resistance and high velocity through optic lights. So when you are dealing with fiber optic connection or installation keep it mind it is not an ordinary cable. Cable jet machine best fiber blowing technologhy in telecomunication sector.
Most of the operator handles fiber optic connection installation projects are very familiar with the features and special treatment that is needed to handle this cable. The best machine which makes the work of installing easier is a cable jet machine. This powerful machine works on hydraulic concept where the air pressure is used to blow the cable under the dedicated channel. In the installation process, the operatoralso usesa special port and connector which needs different tools and machine to establish the end connection from cable jet machine.
For the domestic use the bandwidth of a fiber optic is within terabytes. But in commercial use high capacity cables are needed to establish long distance connection in a wide range of area. There are thousands of fibers exist in a single fiber cable which carry data at a lightning speed that is the reason most of the people prefer the fiber optic cable for cable jet machine.
A Few Important Features Of Cable Jetting Machines
The device named cable-blowing machine has been an extremely important machine. It is a device that is specially designed to fit the fibre optic cables namely to the telecommunication ducts with the assistance of either air or water.
General features of the device:
Now let’s have a view on the general features of the device.
There is an air compressor that is specifically designed for use of the micro fibre cable jetting. This is a very reliable and trusted screw compressor, which is powered by gasoline engine. It provides maximum work pressure of 220psi with about 35.3 cms. The compressor is also modified in a special way to include an after cooler and water separator specifically. The output air is then filtered and conditioned for better performance of the machine. The compressor package generally includes a 50-foot diameter air hose for connection to the machine.
The new cable jetting machine has been classified according to their compression ratios. It will be quite interesting to know that Cable Blowing Machines are also sometimes termed as blast blowers or draft blowers mainly in iron and steel industries. They are most frequently used in such industries.
This type of machines is mainly used in many industries. They reduce the load of work to a great extent. It can be said that the introduction of new machines has reduced work mainly manual one to a large extent. This is all possible only due to the invention of latest technologies. Man is much more dependent on this machine as they have reduced working manner. It has been estimated that day-by-day the use of this machines will increase further instead of reduction. It is hoped that in future there will be more such machines to reduce load.
Cable Jetting Machine